1、Membrane material description; two kinds of membrane materials are used, one is the surrounding pillars are 600 g/㎡, 0.55mm thick (the picture is green), and the roof is 400 g/㎡, the thickness is 0.35mm (the picture is white), The advantage of air-ribbed tents is that they are fast to build and move, but the disadvantage is that they have poor wind resistance.
2、Size: The picture size is 26mX45m, the side height most can be 6 meters, the top height is 10 meters, The span width most is 30meter
3、Fixed way: the fixing method is fixed with a drawstring below (steel brazing or sandbags), and a sandbag is placed inside the double layer (the zipper is opened to open the sandbag), and the eaves position is fixed with the inclined fiber and the air rib 3 meters away from the position ( Steel drill or sandbag), can resist wind 6-8 when fixed
4、Number of fans; the design requirement is 100 square meters/1 set (26X45=1170² requires 12 fans), the fan power is 1100 watts, 220 ﹣ electricity, anti-headwind design, use 12 fans when starting to inflate, wait until the blowing is completed and the pressure is reached. 6-8 units are enough
5、Installation method; first make sure that there is no other thing on the ground, keep no sharp objects such as stones, branches, steel bars, etc., measure the span for splicing, basically 500²/block , connect with burrs, not inflatable, each charge each , The fixing method is fixed with the ground with a pull rope below (steel drill or sandbag)